PRODUCTS

   No .2

Exterior above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200° F.

A solvent-based inorganic zinc-rich primer,  one high solids epoxy intermediate coat, and a two component acrylic polyurethane topcoat.

859.06  Inorganic Zinc-Rich Primer                                 347.67  Wilkopon HS Primer Red                                       721.52  Wilkothane HS White (or colors)

  No. 3

Exterior above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200° F.

An organic zinc-rich primer, one HS epoxy intermediate coat and a two-component acrylic polyurethane topcoat.

349.10 Organic Zinc-Rich Epoxy Primer                         347.67  Wilkopon HS Primer Red                                       721.52  Wilkothane HS White (or colors)

  No. 4

Surface previously coated with conventional alkyd or silicone alkyd judged to be in sufficiently good condition to upgrade with urethane or epoxy top coats.

Two component epoxy polyamide “barrier coat” primer and selected high performance top coat.

347.67  Wilkopon HS Primer Red OR                         342.46 Wilkopon Primer Beige                               721.52  Wilkothane HS White (or colors)

  No. 4B

Previously painted compressor engines coated with conventional alkyd enamels. Also ferrous metals subject to chemical, moisture, oils, glycol, or other contaminant attack. Surface temperature operating to 250º F.

Fast dry epoxy prime coat with a two component polyurethane topcoat for application to prepared steel surfaces. This coating system will provide outstanding chemical resistance, excellent weatherability, color and gloss retention, and corrosion resistance.

342.45 Wilkopon LVOC Primer Gray                          342.46 Wilkopon Primer Beige                                721.52  Wilkothane HS White (or colors)

  No. 5

Exterior, above-ground, steel structures, piping, vessels, tanks, process facilities operating to 200º F.

High-solids epoxy aluminum mastic primer coat and a high solids acrylic urethane top coat for application to marginally prepared or well prepared steel surfaces. Also may be used as a repair system for damaged urethane coating. Excellent weatherability, gloss and color retention, and corrosion resistance.

339.03 Wilkopon Mastic Aluminum                             721.52  Wilkothane HS White (or colors)

  No. 7

Exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F. Ideal for surfaces that are subject to condensation.

High solids epoxy mastic prime coat for application to minimally prepared steel surfaces. Also as a repair system for damaged urethane coatings. May be applied to previously painted surfaces. Excellent corrosion resistance.

339.03 Wilkopon Mastic Aluminum

  No. 7A

Unpainted concrete floors, walls, pits, etc. previously painted concrete may be recoated after proper surface preparation. New concrete must cure for a least 30 days prior to painting. (See Concrete Floor Section)

Primer coat of gray epoxy primer and a finish coat of a two-component, high solids epoxy mastic.

342.45 Wilkopon LVOC Primer Gray                         331.15 Wilkopon Epoxy Mastic White (or other colors)

  No. 8

Typically used for new facility piping under 170º F (meter runs, regulator runs, valves, above ground appurtenances, and other natural gas facilities which do not exceed 170º F).

A solvent-based inorganic zinc-rich primer, and one high solids epoxy mastic topcoat.

859.06 Inorganic Zinc-Rich Primer                         339.03 Wilkopon Mastic Aluminum

  No. 9

Ferrous metal surfaces subject to mild or moderate industrial environments. Exterior or interior environments to 200º F. May be used to recoat old, conventional paints.

Conventional alkyd primer and a phenolic aluminum topcoat.

497.50 HS Corrosion Resisting Red Primer            369.01 or 369.09 Phenolic Aluminum 

  No. 10

Ferrous metal surfaces subject to mild or moderate industrial environment. Exterior or interior condition to 200º F. May be used to recoat old, tightly adhering conventional paints.

High solids alkyd primer and a high solids phenolic aluminum topcoat.

497.105  or 497.50  HS Corrosion Resisting Red Primer

369.09 HS Phenolic Aluminum

  No. 11

Above ground steel structures, piping, vessels, tanks, towers, or processing facilities operating to 200º F.

Two coats of coal tar epoxy. Designed for resistance to severe corrosive atmospheres.

336.07 Wilkopon Coal Tar Epoxy

  No. 12

Above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F.

Epoxy high solids polyamide primer and two coats of coal tar epoxy. Designed for resistance to severe corrosive atmospheres or below-grade application.

347.67  Wilkopon HS Primer Red OR                        342.46 Wilkopon Primer Beige                                 336.07 Wilkopon Coal Tar Epoxy

  No. 13

Below ground steel structures, piping, vessels, tanks, towers, or processing equipment operating to 200º F.

Three coats of coal tar epoxy. Designed for resistance to severe corrosive atmospheres.

336.07 Wilkopon Coal Tar Epoxy

  No. 15

Steel surfaces operating with skin temperatures from 400º F to 1000º F. Examples: Turbine and engine exhaust systems, mufflers, stacks, hot piping, etc.

Solvent-based silicone zinc primer with a “tack coat” and topcoat of high heat silicone aluminum (1000º F).

809.01 Silicone Zinc-Rich Primer                              849.01 Silicone Aluminum (or other colors)

  No. 16

Steel surfaces operating from 200º F to 400º F. Moderate to severe exposure conditions. To be used where an aluminum-colored paint is not desirable (hot discharge bottles and piping, hot glycol lines, etc.). Fabricator friendly.

Modified silicone gray primer and silicone acrylic top coat (Modified Silicone White and colors). This system will air dry to allow fabrication off-site and shipment to property with minimal damage.

802.01Modified Silicone Gray Primer                     821.02 Modified Silicone White (or other colors)

  No. 17

Exterior, above ground steel structures, piping, vessels, tanks, and towers. Operating temperatures to 1000º F.

A high performance system with excellent corrosion resistance. The coating system consists of an inorganic zinc-rich primer and high-heat silicone topcoat.

859.06 Inorganic Zinc-Rich Primer                          849.01 Silicone Aluminum (or other colors)

  No. 18

Ferrous metal surfaces subject to mild or moderate industrial environments. Exterior or interior environments to 200º F. May be used to recoat old, conventional paints.

A high solids alkyd corrosion resisting primer and gloss enamel topcoat.

497.50 HS Corrosion Resisting Red Primer                                                                       461.14 Enamel Gloss White (or other 460- colors)

  No. 19

Ferrous metal surfaces subject to mild or moderate industrial environments. Exterior or interior environments to 200º F. May be used to recoat old, conventional paints.

Alkyd high solids primer and silicone alkyd topcoat.

497.50 HS Corrosion Resisting Red Primer            821.04 Silicone Alkyd White (or other colors)

  No. 21

Interior or exterior above ground concrete structures, basement walls, interior and exterior transite, galvanized or primed metal, and wood structures, exposed to ambient conditions.

Water borne exterior acrylic latex designed for ease of application and superior performance.

907.15 WB Primer Red (or 902-13 Gray)

931.02 WB Acrylic Latex White (or other colors)

  No. 22

New or weathered  galvanized metal, aluminum or aluminum-coated metal operating to 170º F.

Vinyl wash primer and selected top coat, usually alkyd, silicone alkyd, latex or a high performance epoxy or urethane.

603.08 Vinyl Wash Primer                                        331.29 Wilkopon Epoxy White  OR                              461.14 Enamel Gloss White (or other 460- colors)  OR 721.52 Wilkothane HS White (or other colors) OR      821.04 Silicone Alkyd White (or other colors) OR      931.02 WB Acrylic Latex White (or other colors)  

  No. 23

Unpainted concrete floors, walls, pits, etc. Previously painted concrete may be recoated after proper surface preparation. (See Concrete Floor Section).

Two component, solvent-based epoxy polyamide high solids coating.

342.22 Wilkopon Primer Gray                                  331.29 Wilkopon Epoxy White  OR                         332.111 Wilkopon HS Floor Gray

  No. 24

Typically used for new facility piping under 200º F (meter runs, valves, above ground appurtenances, and other natural gas facilities which do not exceed 200º F).

An inorganic zinc-rich primer, one HS epoxy intermediate coat and a two-component HS acrylic polyurethane topcoat.

859.06 Inorganic Zinc-Rich Primer

  No. 25

Previously Painted* exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F, up to 250º F intermittent.

High solids epoxy prime coat with a high solids two-component acrylic polyurethane topcoat for application to prepared steel surfaces. Also as a repair system for damaged urethane coatings. Excellent weatherability, color and gloss retention, and corrosion resistance.

347.67  Wilkopon HS Primer Red or                         342.46 Wilkopon Primer Beige          

  No. 25A

Previously Painted* Exterior, above ground steel structures, piping, vessels, tanks, or process facilities operating to 200º F, up to 250º F intermittent.

High solids epoxy prime coat with a high solids two-component acrylic polyurethane topcoat for application to prepared steel surfaces as a repair

347.67  Wilkopon HS Primer Red or                         342.46 Wilkopon Primer Beige          

No. 26

Exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F.

High solids epoxy mastic prime coat with two component acrylic polyurethane topcoat for application to minimally prepared steel surfaces. Also as a repair system for damaged urethane coatings. May be applied to previously painted surfaces. Excellent weatherability, color and gloss retention, and corrosion resistance.

339.03 Wilkopon Aluminum Mastic OR                                332.54 Wilkopon Pearl Gray Mastic

  No. 27A

Ferrous metal surfaces subject to mild or moderate industrial environments. Exterior or interior environments to 200º F. May be used to recoat old, conventional paints.

Alkyd high solids primer and silicone alkyd topcoat.

497.50 HS Corrosion Resisting Red Primer             821.04 Silicone Alkyd White (or other colors)  

  No. 28

Exterior above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F.

A high solids organic zinc-rich primer, one HS expoxy intermediate coat and a high solids polyurethane topcoat (all two component systems)

349.10, 349.13 or 349.23  Wilkopon HS Organic Zinc-Rich Primer  

342.46 Wilkopon Primer Beige

721.52 Wilkothane HS White (or other colors)

  No. 29

Exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F, up to 250º F intermittent.

High solids recoatable epoxy prime coat with a high solids two-component acrylic polyurethane topcoat for application to prepared steel surfaces. Also as a repair system for damaged urethane coatings. Excellent weatherability, color and gloss retention, and corrosion resistance.

342.46 Wilkopon Primer Beige

721.52 Wilkothane HS White (or other colors)

  No. 29A

Exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F, up to 250º F intermittent.

High solids recoatable epoxy prime coat with a high solids two-component acrylic polyurethane topcoat for application to prepared steel surfaces. Also as a repair system for damaged urethane coatings. Excellent weatherability, color and gloss retention, and corrosion resistance.

347.67  Wilkopon HS Primer Red or                         342.46 Wilkopon Primer Beige                                721.52 Wilkothane HS White (or other colors)            720.18 Wilkothane HS Clear             

  No. 30

Unpainted concrete floors, walls, pits, etc. Previously painted concrete may be recoated after proper surface preparation. (See Concrete Floor Section)

Two component 100% solids epoxy polyamide coating, solvent-based.

332.74 Wilkopon HS Gray (or color).

  No. 31

Structural steel or piping that will located below grade (buried in soil)

One coat application of 100% solids fiberglass-flake filled polyester or vinyl ester resin, providing an almost impermeable coating and exhibiting outstanding abrasion, solvent and chemical resistance in severe environment.

1011.05  Wilkoshield White (or color)

  No. 32

Exterior, above ground steel structures, steel buildings, piping, vessels, tanks, towers, or process facilities operating to 200º F.

Used for exterior surfaces steel in industrial areas. Primer can be used as a barrier coat for old but sound conventional coatings for subsequent topcoating with coating systems that may contain strong solvents such as epoxies, polyurethanes, vinyls, alkyds, and lacquers.

607.17 Universal Primer Red (available in Beige, Gray) 331.29 Wilkopon Epoxy White  OR                              461.14 Enamel Gloss White (or other 460- colors)  OR 721.52 Wilkothane HS White (or other colors) OR      821.04 Silicone Alkyd White (or other colors) OR      931.02 WB Acrylic Latex White (or other colors)  

  No. 36

Indoor or outdoor above ground steel structures, piping, vessels, tanks, towers, process facilities, etc., operating to 200º F.

Water borne inhibitive red oxide primer and water borne acrylic gloss topcoat.

907.15 WB Primer Red (or 902.13 Gray)                   941.05 WB Acrylic White

  No. 43

Interior or exterior above ground steel structures, piping, vessels, tanks, towers, process facilities, etc., operating to 200º F.

Water borne inhibitive red oxide primer and water borne acrylic aluminum gloss topcoat.

907.15 WB Primer Red (or 902.13 Gray)

949.902 WB Acrylic Aluminum

  No. 46

Exterior, above ground steel structures, piping, vessels, tanks, towers, or process facilities operating to 200º F. Ideal for surfaces that are subject to condensation where added corrosion, impact and abrasion resistance is required.

High solids epoxy mastic prime coat for application to minimally prepared steel surfaces. Also as a repair system for damaged urethane and mastic coatings. Maybe be applied to previously painted surfaces. Excellent corrosion resistance. Coated pipes may be buried after 30 minute’s cure time at 75º F. May be applied at temperatures as low as 35º F.

336.36 Wilko Gator-Kure Coal Tar or 331.46 White